09:06-09:18 UTC pass, received only ax.25 beacons, there were no CW and voice messages.
Eleven frames received, own software indicates that the status is “PINK”
1:Fm W5UL-15 To W5UL <UI F/C Pid=F0 Len=69> [10:11:04R] +W5UL,CAPE-2,30,PK,201301281912CST,5682mV,010-1,30,-1C,2C,ulcape.org# 1:Fm W5UL-15 To W5UL <UI F/C Pid=F0 Len=68> [10:11:34R] +W5UL,CAPE-2,32,PK,201301281912CST,5274mV,01000,32,0C,3C,ulcape.org# 1:Fm W5UL-15 To W5UL <UI F/C Pid=F0 Len=68> [10:12:04R] +W5UL,CAPE-2,34,PK,201301281913CST,5792mV,010-1,34,0C,3C,ulcape.org# 1:Fm W5UL-15 To W5UL <UI F/C Pid=F0 Len=68> [10:12:34R] +W5UL,CAPE-2,36,PK,201301281913CST,5476mV,01000,36,0C,3C,ulcape.org# 1:Fm W5UL-15 To W5UL <UI F/C Pid=F0 Len=68> [10:13:04R] +W5UL,CAPE-2,38,PK,201301281914CST,5790mV,01000,38,0C,4C,ulcape.org# 1:Fm W5UL-15 To W5UL <UI F/C Pid=F0 Len=68> [10:13:34R] +W5UL,CAPE-2,3a,PK,201301281914CST,5576mV,01000,3a,0C,5C,ulcape.org# 1:Fm W5UL-15 To W5UL <UI F/C Pid=F0 Len=68> [10:14:04R] +W5UL,CAPE-2,3c,PK,201301281915CST,5287mV,01000,3c,1C,5C,ulcape.org# 1:Fm W5UL-15 To W5UL <UI F/C Pid=F0 Len=68> [10:14:49R] +W5UL,CAPE-2,3f,PK,201301281916CST,5533mV,01000,3f,1C,6C,ulcape.org# 1:Fm W5UL-15 To W5UL <UI F/C Pid=F0 Len=68> [10:15:20R] +W5UL,CAPE-2,41,PK,201301281916CST,5315mV,01000,41,1C,6C,ulcape.org# 1:Fm W5UL-15 To W5UL <UI F/C Pid=F0 Len=68> [10:15:34R] +W5UL,CAPE-2,42,PK,201301281916CST,5807mV,01000,42,2C,6C,ulcape.org#
Hi, Are you using a TNC for feeding the data to the application.
73
Nitin [vu3tyg]
Hello Nitin, yes I’m using a TNC2 clone in KISS mode to feed the data. In the bottom part of the software you can select the com port and settings where the tnc is.
Regards!
And you can use as well mixw emulating two ports, one port for the tnc and the other one for the software, as is describe here:
http://www.ne.jp/asahi/hamradio/je9pel/mix3win7.htm
You can set a pair of ports , in the second pair you must set up the cape software
Thanks , this helps